Material puckers, 6 threads jam at start of sewing, Machine is noisy – SINGER W1240 User Manual
Page 48: 1 8. bobbin does not wind properly, Enjoy your new шн1те, Enjoy your new, Шн1те
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
' "
a
h
as you s.a„ sew,„g. Always s.a. and end w,.d
your take-up lever in its highest position.
‘ t. p!,™brfc wdile sewing bends .be needle, ,bls neay cause b.eabage I, needle b,.s
the plate.
B. Needle is inserted incorrectly.
C. Needle is too fine for the type of fabric.
D. Needle is hitting pins.
,
E. Presser foot is improperly fastened.
F. Machine is improperly threaded.
5. MATERIAL PUCKERS
A.
Tensions are too tight.
B.
Improper threading.
C. Thread is too heavy for fabric.
D.
Stitch is too
long for fabric.
r Tr:ii'loo.^i„r:se3 “ n«:Jlg .be .ab.ic .au. enougb.
G. If all else fails, try sewing over paper.
6 THREADS JAM AT START OF SEWING
re’Tb,rdtnS“idt an“d'‘'S 'ГЛГо. presse. ,og. Ins.ead o. .o .be bacb.
c.
Be sure the presser foot is down on thick fabrics.
7. MACHINE IS NOISY
I
ErCS i a?r^Гeb «.«ct's.l.cbing - Se. Is a. 4 ,
1
8. BOBBIN DOES NOT WIND PROPERLY
A.
Machine is improperly threaded.
.
тяк1па
contact.
B, Rubber wheel on bobbin winder is worn or not making contac
1 C. Bobbin winder tension disc is not in position.
enjoy your new
ШН1ТЕ
47