SINGER W1240 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UPPER THREADING
and between tension
and up to take up
Raise needle bar to its highest position.
Raise presser foot.
Lead thread through top plate thread guide (1
discs (2).
Pull thread down around arm thread guide (3)
lever (4).
Lead thread through eyelet on take-up lever from right to left and
down through face plate guide (5), hooking thread into guide.
Pull thread down through needle clamp guide (6) and through
needle hole from front to rear (7).
I'
n
l\
Always use the same type of thread on top and bottom as different
sizes or types of thread will cause tension problems.
Example: Polyester thread on the bobbin and cotton thread on top
will result in poor tension quality.
8