Winding a bobbin – SINGER 9113 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WINDING A BOBBIN
The wind-in-place bobbin winds quickly and easily while it’s in the machine.
• Raise needle to highest position by
turning hand wheel toward you.
• Raising presser foot.
• Open slide plate.
Turn pattern selector dial (1) until indicat
ing dot lines up under Straight Stitch/
Bobbin Winding. (Details on “Selecting
a Pattern” are on page 18.)
Put an empty bobbin, with black rings
(3) facing up, into bobbin case (4).
•
• Close slide plate, lining up marks (5) on
slide plate and machine bed. This
engages the bobbin winder.
• If your machine has pop-up automatic
positioning button (6), close slide plate
until it stops against button. This will
automatically engage bobbin winder.