SINGER 384.18024 (Sold at Sears) User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• Inserting the bobbin
0 End of thread
®
Notch
@ Notch
©Threading chart
m Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
I
Guide the thread into the notch (
2
) on the front side of the
bobbin holder. Draw the thread to the left, sliding it between
the tension spring blades.
[
3
] Continue to draw the thread lightly until the thread slips into
the notch (3). Pull out about 6.0” (15.0cm) of thread.
E Attach the hook cover plate.
D]
0
0
26
Advertising
This manual is related to the following products: