Buttonhole stitches, Automatic buttonhole, Auto buttonhole -72 – SINGER 384.18024 (Sold at Sears) User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BUTTONHOLE STITCHES
Automatic Buttonhole
(T) stitch
selector:
[]
@ Stitch width:
3 to 6.5
(
3
) Stitch length:
c'";'// zone
0 Needle thread tension:
2 to 6
® Presser foot R:
Automatic buttonhole foot
• Preparation for Sewing
(T) Groove
@ Pin
Attach the automatic buttonhole foot R. Make sure the groove
on the holder catches the pin on the foot when lowering the
presser foot.
• To Sew
0 Button holder
® Buttonhole lever
The buttonhole size is automatically set by placing the button
in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1.0’’(2.5 cm)
in diameter.
Make a test buttonhole on an extra piece of the fabric to check
your settings.
Use interfacing on stretch fabrics.
Pull the button holder ® to the back, and place the button in it.
Push it together tightly on the button.
Pull the buttonhole lever (
2
) down as far as it will go.
68