Stitch selector (how to select stitches), Stitch width control, How to adjust the stitch width) – SINGER 384.18024 (Sold at Sears) User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stitch Selector (how to select stitches)
Raise the needle and turn the stitch selector until the red
indication is below the desired stitch.
® Stitch selector
(2) Red indicator mark
@ Foot indicator window
* The foot indicator windows shows the recommended foot
for the selected pattern, a letter on the right shows the foot
for stretch patterns. Refer to page 20 for usage.
Stitch Width Control
(how to adjust the stitch width)
Turn the stitch width control until the desired number is shown at
the indicating mark.
The larger the number, the greater the stitch width.
55
mark shows the adjustment range when using the twin needle.
* Before turning the stitch width control, be sure to raise the
needle above the fabric.
© Indicating mark
34