Applique, Embroidery – SINGER 384.18024 (Sold at Sears) User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Applique
© Stitch selector:
5
@ Stitch width:
2 to 6.5
@ Stitch length:
0.5 to 1
®
Needle thread tension:
2 to 6
® Presser foot F:
Satin stitch foot
® Pressure adjusting lever: 2
Baste applique pieces on the fabric, or fuse the applique
pieces with iron-on fabric joiner. Stitch around the applique
making sure the needle falls along the raw edge of the
applique.
Embroidery
© Stitch selector:
5
@ Stitch width:
1 to 6.5
@ Stitch length:
Any
@ Needle thread tension:
2 to 6
® Feed dogs:
Dropped
‘Presser foot:
Remove
Drop the feed dogs and remove the foot holder. Adjust stitch
width as desired. Draw a design onto the fabric with tailor’s
chalk. Stretch the fabric between embroidery hoops and place
under the needle.
Lower the Presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand, rotate the
handwheel counterclockwise for one complete turn.
Pull the needle thread to draw the bobbin thread to the right
side of the fabric. At medium speed, stitch along the marked
outline, guiding the fabric carefully by hand. After embroidery
is completed, raise the feed dogs for normal sewing.
80