Care ofyour machine, Note, Cleaning the bobbin holder – SINGER 384.18024 (Sold at Sears) User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARE OFYOUR MACHINE
NOTE:
* Unplug the machine.
* Do not dismantle the machine other than as explained in
this section.
* Do not store the machine in a high-humidity area, near a
heat radiator or in direct sunlight.
* Clean the outside of the machine with a soft cloth and mild
soap.
Replacing the Light Bulb
CAUTION:
As the light bulb could be
HOT,
protect your
fingers when you handle it.
Unplug the machine and open the face cover. Push the bulb
up and turn it counterclockwise to remove. Put in a new bulb
by pushing it up and turning it clockwise.
Cleaning the Bobbin Holder
To insure that the machine operates at its best, you need to
keep the essential parts clean at all times. Collect dust and
lint from the bobbin area. The machine can become slug
gish or knock loudly when a thread is caught.
Turn off the power switch and unplug the machine. Remove
the hook cover plate by sliding the hook cover plate release
button to the right.
Take out the bobbin. Brush out dust and lint with a lint brush
or a vacuum cleaner.
Insert the bobbin and attach the hook cover plate.