How to adjust buttonhole stitch density, How to adjust buttonhole stitch balance – SINGER 384.18024 (Sold at Sears) User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
If the button is extremely thick, make a test buttonhole.
If it is difficult to fit the button through the test buttonhole,
lengthen the buttonhole by pulling the button holder on the
foot back to increase the length.
(T)Gap
How to Adjust Buttonhole Stitch Density
Use the stitch length control ® to adjust stitch density.
Turn the dial in direction ® for a coarser density
(
2
).
Turn the dial in direction (!) for a tighter density
(D.
72
Advertising
This manual is related to the following products: