Manual buttonhole (option) – SINGER 384.18024 (Sold at Sears) User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual Buttonhole (Option)
0 stitch selector:
D
@ Stitch width;
3 to 6.5
@ Stitch length:
zone
®
Needle thread tension:
2 to 6
(D Presserfoot B (option):
Buttonhole foot
• Manual Buttonhole
* If the diameter of the button is more than 1.0”(2.5 cm), a
buttonhole must be made manually as follows:
|T]Turn the handwheel toward you to raise the needle to its
highest position. Raise the presserfoot lifter.
[11
Set the stitch at “ |] ” by turning the stitch selector.
* If the stitch is already on at “ |] ” reset the machine in
accordance with the instructions on page 70.
[^ Attach the buttonhole foot (B).
[Tl Pull the buttonhole lever downward as far as it will go.
[si Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
©
WIDTH L
ai
LENGTH
I5J
131
©
Sew the front bartack and left row, then stop the machine
after sewing the desired total length of buttonhole.
0 Pull the buttonhole lever toward you.
] Sew the back bartack and right row, then stop the ma
chine at the starting point.
* To cut the opening and to reset for sewing the next
buttonhole, refer to the instructions on page 70.
□
■0
S
0
0
E