To prepare for sewing, To commence sewing – SINGER W150 FL User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. TO PREPARE FOR SEWING
(1 ) Hold the end of the upper-thread with
the left hand, leaving it slack from the
hand to the needle.
(2} Turn the Balance wheel over toward you
for the needle to move down and up
again to its highest.
Pull the thread you are holding, as the
lower-thread will be brougnt up with it
through the hole in the needle-plate, as
shown (Fig. 121.
Place both ends of the upper and lower
thread to the back of the presser foot.
' (Fig. 13).
8. TO COMMENCE SEWING
Place the fabric to be sewn beneath the
(2; Lower the presser foot, by lowering the
presser bar lifter.
(3) Commence sewing slowly by turning the
balance wheel in direction toward you
while gradually working the rheostat con
Always turn balance wheel toward you
and not away from you.
TO THREAD THE MACHINE & NEEDLE
TO PREPARE FOR SEWING • TO COMMENCE SEWING
TO REMOVE THE WORK • TO REGULATE THE THREAD TENSION • TO REGULATE THE STITCH LENGTH
E PRESSURE OF THE PRESSER FOOT TO USE THE DROP FEED DIAL_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
BUILT IN LIGHT................ ........... TO OIL SEWING MACHINE