SINGER W150 FL User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Thread guide (5)
(3)
Pass the thread through the bobbin winder thread guide (5) as illustrated, wind
the end of the thread on the bobbin 7 or 8 times, then place it
on the bobbin winder spindle (7). When placing the bobbin on
the bobbin winder spindle, keep in mind that the BOBBIN WILL
SPIN
CLOCKWISE.
With
your
right
forefinger
push
the
lever
(Marked PUSH), and the spindle will go toward the right auto
matically by the action of spring (Fig. 4)
(4) While slowly turning the balance wheel toward you with your right hand, operate
the rheostat control as you would in actual sewing.
,
(5) When enough thread is wound on the bobbin the lever will be released auto
matically and will cause the spindle to stop winding and remove toward the left.
Then you may take off the bobbin. - ■ y; ..-.',1'