Some^ useful sewing hints needle and thread – SINGER W150 FL User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 28
You
can
automatically
oil
the
vital
parts
of
your
machine
by
pressing
the
OILING BUTTON (Fig. 25)
a few times.
If you are using your sew
ing machine daily, do this
once Or twice a week.
After oiling, run the machine
rapidly for a few minutes
to let the oil reach every
moving part. You may check on through the PLASTIC VIEWER how much oil is being
applied by pressing the button. If no oil is applied by doing so, you may find that
the oil tank is empty.
HOW TO FILL THE OIL TANK
Take off the TOP COVER by releasing the screws on the cover and inside the face
plate as illustrated. (Fig. 26, 27) Remove the oil button and fill the tank. (Fig. 28)
Never use impure oils lest they should hinder the flow through the pipes and burden
the' operation of the Sewing Machine.
The parts to be oiled outomatically are shown by (T) — ® (Fig. 29)
(I) Slide take up lever
link & hinge pin
(D Arm shaft bushing front
( 3 j Feed regulator
(D Crank connecting rod
® Arm shaft bushing back
I® Oscillating shaft front bearing
(jj Oscillating shaft back bearing
© Oscillating rock shaft
SOME^ USEFUL SEWING HINTS
NEEDLE AND THREAD "
sizes
TO OIL SEWING MACHINE
CAUSES OF COMMON DTOULTiiS