Darning and embroidery – SINGER W120 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
17
.
DARNING AND EMBROIDERY
Raise the presser bar lifter and remove the presBei. foot. Then lower the presser
bar lifter to ensure the thread tension device is set correctly.
Set
the drop feed knob at "O",
Now your machine is ready for embroidery and darning.
Embroidery will be done most successfully when the fabric is stretched and fixed in
an embroidery hoop. Hold the hoop closely on the machine bed with both hands, press
the material with your left forefinger in the vicinity of the needle.
This will help in holding down the material and will prevent the machine from
making skipped stitches. Manipulate work carefully and be sure to keep fingers out
of the path of the needle.
Adjust thread tensions for the best appearance of embroidery work and slightly in
crease the bobbin thread tension to avoid the lower thread from being pulled up.
18
-