How to insert the bobbin case, Remove the bobbin case, How to remove the bobbin case – SINGER W120 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. HOW TO REMOVE THE BOBBIN CASE
(a) Raise the needle bar to its highest point by
turning the balance wheel.
(b) Open the bobbin case cover.
(c) Open the latch of the bobbin case and take it
(d) Close the latch of the bobbin case thus taken
out, and turn it with the open side downward.
The bobbin will drop out.
HOW TO INSERT THE
(a) Open the latch and insert the bobbin case on the
shuttle race pin. Be sure that the
into the slot in the shuttle race.
(b) Close the latch when the bobbin case has been
(c) Be careful not to remove or insert the bobbin
case when the needle bar is lowered. The shuttle
body and the shuttle race will be damaged if
this warning is ignored.
— 6 —