How to thread the bobbin case – SINGER W120 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
(a) Hold the bobbin in your right hand, pull out the thread about 5 inches, and
insertin the bobbin case. (Fig. A)
(b) Pull the thread through the slot in the bobbin case as indicated in Figure B,
and pull the thread under the tension spring.
(c) Pull out the thread, and it will come out to the position indicated in Figure C.
8. HOW TO THREAD THE BOBBIN CASE
Advertising