Winding the bobbin – SINGER W120 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. WINDING THE BOBBIN
The bobbin is easily wound by the fol
lowing method.
(a) Turn the stop motion knob (1) toward
you while holding the balance wheel
(2) with the left hand, loosening it
so the wheel will run free without
operating the sewing mechanism.
(b) Place the Spool on the Spool.pin (3).
Pass the end of the thread through the
Arm Thread Guide (4). Also pass it
between the discs of the tension brack
et (5). Wind the thread around the
Bobbin (6) seven or eight times, and
place the bobbin on the Bobbin winder
spindle (7). The bobbin winder auto
matically disengages when the bobbin
is about 907o full.
5
4
3
8
7 6 2
Fig. 4