O c t u – Casio wk 200 User Manual

Page 18

Advertising
background image

Controlling the Keyboard Sounds

E-16

Octave Shift lets you raise or lower the pitch of the keyboard
notes in octave units.

• The octave shift setting range is –2 to +2 octaves.
• When using Split (page E-13), you can individually set the

left and right keyboard ranges to the pitches you want.

1.

Keep pressing

cq

until the screen shown below

appears on the display.

If you want to use Split, turn on Split before pressing

cq

.

• If you do not perform any operation for a few seconds

after this screen appears, the display will return to the
previous screen automatically.

2.

Use the

bs

(10-key) [–] and [+] keys to shift the

octave.

3.

Press

cq

.

4.

Press

cq

again.

You can use the pitch bend wheel to slide the pitch of notes
smoothly upwards and downwards. This technique makes it
possible to produce effects that are similar to sounds
produced when bending notes on a saxophone or electric
guitar.

1.

While playing a note on the
keyboard, rotate the pitch bend
wheel on the left of the keyboard
upwards or downwards.

The amount the note bends depends on how
much you rotate the pitch bend wheel.

• Do not have the pitch bend wheel rotated

as you turn on the Digital Keyboard.

Use the following procedure to specify how much the pitch of
the note changes whenever the pitch bend wheel is rotated
upwards or downwards. You can specify a range from 0 to 12
semitones (one octave).

1.

Press

ct

and then use the

bs

(10-key) [4] (

)

and [6] (

) keys to display “OTHER” (page

E-6).

2.

Press

bs

(10-key) [7] (ENTER) key.

3.

Use the

bs

(10-key) [4] (

) and [6] (

) keys

to display “Bend Rng”.

4.

Use the

bs

(10-key) [–] and [+] keys to change

the range.

Octave Shift

• Split On : This step affects the right side keyboard

range only.

• Split Off : This step affects the entire keyboard range.

• Split On : The screen shown below will appear. Use the

bs

(10-key) [–] and [+] keys to shift the

octave for the left side keyboard range.

• Split Off : The screen shown below will appear.

Advance to step 4.

O c t U

p p

e r

O c t L o w e r

Using the Pitch Bend Wheel to
Shift the Pitch of Notes
(WK-500 Only)

To play with the pitch bend wheel

Specifying the Pitch Bend Range

O T H E R

Flashes

B e n d R n

g

WK200_02_e.fm 16 ページ 2008年5月19日 月曜日 午後7時14分

Advertising
This manual is related to the following products: