Casio wk 200 - Manual (Page 8)

General Guide
E-6
Use the number buttons and the [–] and [+] buttons to change
the settings of the parameters that appear in the upper left
area of the display.
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 001, input 0
3 0 3 1.
• Negative values cannot be input using the number buttons.
Use [–] (decrease) and [+] (increase) instead.
You can use the [–] (decrease) and [+] (increase) buttons to
change the displayed number or value.
• Holding down either button scrolls the displayed setting.
• Pressing both buttons at the same time will revert to the
initial default setting or the recommended setting.
You can use the FUNCTION button ( ct ) to adjust the reverb
effect, to delete data, and to perform a wide range of other
Digital Keyboard operations.
1. Press ct to display the function menu.
2. Use the bs (10-key) [4] ( ) and [6] ( ) keys
to display the function you want.
• You can exit the function menu by pressing ct .
• After selecting functions 8 through 12, press the bs
(10-key) [7] (ENTER) key to display the menu item’s
submenu. Then use [4] (
) and [6] ( ) to select an
item. You can exit a submenu by pressing the bs
(10-key) [9] (EXIT) key.
3.
Refer to the indicated pages for details about
each function.
Using the 10-key Pad ( bs )
Number Buttons
[–] and [+] Buttons
S t . G r P n o
Setting
FUNCTION Button ( ct ) Functions
To select a function
WK200_02_e.fm 6 ページ ２００８年５月１９日 月曜日 午後７時１４分