Casio wk 200 User Manual
Page 64
Using a Memory Card (WK-500 Only)
E-62
• You can input the following characters in a file name.
• The Digital Keyboard displays the “~” character as “
3”.
■ SD Memory Card Data (File) Storage Locations
The above procedure stores Digital Keyboard data in a folder
named “MUSICDAT” on the SD memory card.
• The “MUSICDAT” folder is created automatically when you
format the SD memory card on the Digital Keyboard (page
E-60).
• If you store a file in any location other than inside the
“MUSICDAT” folder, you will not be able to recall, delete, or
play the file on the Digital Keyboard. You also will not be
able to recall, delete, or play any file you store inside of a
subfolder you create inside the “MUSICDAT” folder.
• The message “No File” will appear on the display if you try
to perform a recall, delete, or play operation while there is
no file inside the “MUSICDAT” folder.
Use the following procedure to load data from an SD memory
card into Digital Keyboard memory.
• Whenever you copy a file to the SD memory card that
you plan to recall on the Digital Keyboard, be sure to
store the file in the SD memory card’s “MUSICDAT”
folder.
1.
On the Digital Keyboard, select the data you
want to load as described below.
2.
Insert the SD memory card that contains the
data into the Digital Keyboard’s card slot.
3.
Hold down
dk
until the button lights.
• To cancel data load, press
dk
again.
4.
Use the
bs
(10-key) [4] (
) and [6] (
) keys
to display one of the settings shown below.
• You also could use [–] and [+].
9
J
T
'
8
I
S
_
`
7
H
R
&
~
6
G
Q
S
@
5
F
P
Z
}
4
E
O
Y
{
3
D
N
X
^
2
C
M
W
-
1
B
L
V
)
0
A
K
U
(
Loading Data from an SD Memory
Card into Digital Keyboard
Memory
To load this type
of data
Do this
Sampled sound
Select the tone number of the sampled
sound you want to load.
User rhythm
Select the rhythm number of the user
rhythm you want to load.
User song
Select the song number of the song you
want to load.
Recorded song
Select the song you want to load and
put the Digital Keyboard in playback
standby.
User scale
memory
Press
bq
and then
4
.
Registration data
Select one of the Digital Keyboard’s
default built in tones, songs, rhythms,
etc.
All data
To load this data
Display this screen
Sampled sound
“Lod” “SmplTone”
User rhythm
“Lod” “UserRhy.”
User song
“Lod” “UserSong”
Recorded song
“Lod” “Rec.Song”
User scale memory
“Lod” “ScaleMem”
Registration data
“Lod” “Regist.”
All data
“Lod” “All Data”
WK200_e.book 62 ページ ２００８年５月１６日 金曜日 午後８時４４分