Casio wk 200 - Manual (Page 65)

English
Using a Memory Card (WK-500 Only)
E-63
5. Press the bs (10-key) [7] (ENTER) key.
• Pressing [9] (EXIT) will return to the screen that was
displayed before you pressed [7] (ENTER).
6.
Use the bs (10-key) [–] and [+] keys to select the
data (file) you want to load.
7.
Press the bs (10-key) [7] (ENTER) key.
This will load the data into Digital Keyboard memory.
• If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
message will appear. Press the
bs (10-key) [+] (YES)
key to overwrite, or [–] (NO) or [9] (EXIT) key to cancel.
Use the following procedure to delete data saved on an SD
memory card.
1.
On the Digital Keyboard, select the data you
want to delete as described below.
2. Insert a SD memory card into the Digital
Keyboard’s card slot.
3.
Hold down dk until the button lights.
• To cancel data delete, press dk again.
4.
Use the bs (10-key) [4] ( ) and [6] ( ) keys
to display one of the settings shown below.
• You also could use [–] and [+].
* * * * * * * *
Flashes
C o m p l e t e
R e p l a c e ?
Deleting Data from an SD Memory
Card
To delete this
type of data
Do this
Sampled sound Select the tone number of the sampled
sound.
User rhythm Select the rhythm number of the user
rhythm.
User song Select the song number of the user
song.
Recorded song Select the song and put the Digital
Keyboard in playback standby.
User scale
memory Press bq and then 4 .
Registration data Select one of the Digital Keyboard’s
default built in tones, songs.
All data
To delete this type
of data
Display this screen
Sampled sound “dEL” “SmplTone”
User rhythm “dEL” “UserRhy.”
User song “dEL” “UserSong”
Recorded song “dEL” “Rec.Song”
User scale memory “dEL” “ScaleMem”
Registration data “dEL” “Regist.”
All data “dEL” “All Data”
WK200_e.book 63 ページ ２００８年５月１６日 金曜日 午後８時４４分