Connecting external devices, 1bs bs ct ct bn bn, Connecting a computer – Casio wk 200 User Manual

Page 67

Advertising
background image

English

E-65

Connecting External Devices

You can connect the Digital Keyboard to a computer and
exchange MIDI data between them. You can send play data
from the Digital Keyboard to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Keyboard for playback.

The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the Digital Keyboard to it.

• Operating System

Windows

®

XP (SP2 or later)

*1

Windows Vista

®

*2

Mac OS

®

X (10.3.9, 10.4.11 or later, 10.5.2 or later)

• USB port

• Never connect to a computer that does not conform to

the above requirements. Doing so can cause problems
with your computer.

• Make sure you follow the steps of the procedure below

exactly. Connecting incorrectly can make data send
and receive impossible.

1.

Turn off the Digital Keyboard and then start up
your computer.

• Do not start up the music software on your computer

yet!

2.

After starting up your computer, use a
commercially available USB cable to connect it
to the Digital Keyboard.

3.

Turn on the Digital Keyboard.

• If this is the first time you are connecting the Digital

Keyboard to your computer, the driver software
required to send and receive data will be installed on
your computer automatically.

4.

Start up your computer’s music software.

1

1

bs

bs

ct

ct

bn

bn

Connecting a Computer

Minimum Computer System Requirements

*1: Windows XP Home Edition

Windows XP Professional (32- bit)

*2: Windows Vista (32- bit)

Connecting the Digital Keyboard to Your
Computer

Computer USB port

A connector

Digital Keyboard USB port

B connector

USB cable

(A-B type)

WK200_04_e.fm 65 ページ 2008年5月19日 月曜日 午後7時15分

Advertising
This manual is related to the following products: