Reference, Troubleshooting – Casio wk 200 User Manual

Page 72

Advertising
background image

E-70

Reference

Troubleshooting

Symptom

Action

Included Accessories

I can’t find something that should be here.

Carefully check inside all of the packing materials.

Power Requirements

Power will not turned on.

• Check the AC adaptor or make sure that the batteries are facing

correctly (page E-8).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

The Digital Keyboard outputs a loud sound and then
suddenly powers down.

Replace the batteries with new ones or switch over to AC adaptor
power (page E-8).

The Digital Keyboard suddenly powers down after a
few minutes.

This happens when Auto Power Off (page E-9) is triggered.

Display

The display keeps going out or are flashing.

Replace the batteries with new ones or switch over to AC adaptor
power (page E-8).

On-screen keyboard keys or notes remain on the
display.

A Step Up Lesson is in progress and the Digital Keyboard is waiting
for you to play the next note in the song. To stop this from happening,
cancel the lesson (page E-31).

Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.

Sound

Nothing happens when I press any keyboard key.

• Adjust the main volume setting (page E-9).
• Check if something is plugged into

en

(WK-200: PHONES/

OUTPUT jack) (WK-500: PHONES jack) on the back of the Digital
Keyboard.

• If there is no sampled sound in memory, nothing will play if you

press a keyboard key while a tone in the range of 671 to 678 (WK-
200: 571 to 578) is selected (page E-18).

• Turn power off and then back on to initialize all keyboard settings

(page E-9).

Nothing happens or notes do not play normally when
I play notes on the left side of the keyboard.

Press

bn

to disable chord input in the accompaniment keyboard area

(page E-37).

Nothing happens when I start an Auto
Accompaniment.

• With rhythms 190, and 192 to 200 (WK-200: 170, and 172 to 180),

nothing will sound until you play a chord on the keyboard. Try
playing a chord (page E-37).

• Check and adjust the accompaniment volume setting (page E-40).
• If there is no user rhythm stored in memory, Auto Accompaniment

will not start when you press

bm

while a rhythm in the range of 201

to 210 (WK-200: 181 to 190) is selected (page E-42).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

Nothing happens when I start playback of a built-in
song.

• It takes a little time after you press the button until the song starts to

play. Wait for a moment for the song to start.

• Check and adjust the song volume (page E-28).
• If there is no user song stored in memory, song playback will not

start when you press

bm

while a song in the range of 153 to 162 is

selected (page E-28).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

WK200_e.book 70 ページ 2008年5月16日 金曜日 午後8時44分

Advertising
This manual is related to the following products: