Adjusting the sound characteristics, Attenuating the sound – Sony CDX-2500R User Manual

Page 17

Advertising
background image

17

Changing the operative direction

The operative direction of controls is factory-
set as shown below.

If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.

Press (SOUND) for two seconds while
pushing the VOL control.

Tip
You can also change the operative direction of
these controls with the unit (page 18).

Rotate the VOL control to
adjust the volume.

Press (OFF) to
turn off the
unit.

Press (SOUND) to adjust the
volume and sound menu.

To increase

To decrease

Press (LIST) to display the programme
type names (FM tuner only).

Press (ATT) to
attenuate the
sound.

Other operations

OFF

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.

1

Select the item you want to adjust by
pressing
(SOUND) repeatedly.

VOL (volume) n BAS (bass) n
TRE (treble) n BAL (left-right) n
FAD (front-rear)

2

Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts to volume control.)

Attenuating the sound

Press (ATT) on the optional rotary
commander.
“ATT-ON” flashes momentarily.

To restore the previous volume level, press
(ATT) again.

Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).

Advertising