Datalogic Scanning C-BOX 200 - Manual (Page 24)

C-BOX 200
2
2.7.2 LED Indicators
Power on
Warning
Tx
Figure 16 - LED Indicators
The internal LEDs of the C-BOX 200 (see Figure above) indicate the following:
POWER ON (red) indicates the C-BOX 200 is connected to the power
supply and the power switch is ON.
WARNING (red) indicates a warning or error condition: it is ON when
a connection procedure is in progress (the system is busy)
or during a GET/SEND procedure. It blinks when an error
condition occurs. Normally this LED should be OFF.
TX (green) indicates the RS485 Multidrop activity. When
communication takes place, this LED will blink slightly.
16