ADLINK PCI-9810 - Manual (Page 23)

Hardware Information 11
JP1 Pin Definition
Below is the default JP1 pin assignment.
When JP1 is connected to a 9-pin D-type connector using a ribbon
cable, the pin-out of the D-type connector is changed to:
Table 2-2: JP1 Pin Definition Connected to 9-pin D-type Connector
Pin Signal
1 External Clock Input 1
2 Ground
3 External Digital Trigger Input
4 Ground
5 Digital Input 0
6 Ground
7 Digital Input 1
8 Ground
9 Digital Input 2
10 Ground
Table 2-1: JP1 Pin Definition
Pin Signal
1 External Clock Input 1
2 Ground
3 External Digital Trigger Input
4 Ground
5 Digital Input 0
6 Ground
7 Digital Input 1
8 Ground
9 Digital Input 2
10 N/A