ADLINK aTCA-9710 - Manual (Page 46)

46
5.3.2 Update over KCS
Step1: Prepare an aTCA-9710 with Linux system. Enter the following command to make
sure the ipmi_si and ipmi_devintf modules are loaded before the IPMItool utility can be
used.
Step2: Put IPMItool and “target image” in the Linux system then enter the following
command:
Step3: Select “y” and wait until the string of “firmware update procedure successful”
is displayed.
To update other images (BIOS, FRU, etc), just replace the target image and the file name
while typing command.
Item File name
IPMC firmware hpm1fw.img
BIOS hpm1bios.img