ADLINK aTCA-9710 - Manual (Page 62)

62
Media detect count
Number of times presence of media will be checked.
Set this value to integer.
6.3.6 CSM Configuration
You can use this screen to select options for the CSM Configuration. Use the up and
down < Arrow > keys to select an item. Use the < + > and < - > keys to change the
value of the selected option. A description of the selected item appears on the right
side of the screen. The settings are described on this page. The screen is shown
below.
CSM Support
Enable/Disable CSM Support. Set this value to Enabled / Disabled.
Boot option filter
This option controls whether to hide Legacy/UEFI boot options. Set this value to UEFI
and Legacy / Legacy only /UEFI only.
Network
Controls the execution of UEFI and Legacy PXE OpROM. Set this value to Do not
launch / UEFI / Legacy.