ADLINK aTCA-9710 - Manual (Page 81)

81
6.8 Save & Exit Setup Screen
Select Save & Exit tab from setup utility to enter Save & Exit BIOS setup screen.
You can select an item by highlighting it using the <Arrow> keys. The Save & Exit
BIOS setup screen is shown below.
Save Changes and Exit
When you have completed the system configuration changes, select this option to
leave setup utility and reboot the computer to let new system configuration
parameters can take effect. When selecting this item and then press <Enter>. The
below message will be shown up and wait for the confirmation.
Save Changes and Exit?
[OK] [Cancel]
Select OK and press <Enter> to save changes and exit. It will keep booting the
system to OS if no changes need to reset system.
Discard Changes and Exit
Select this option to quit setup without making any permanent changes to the system
configuration. When selecting this item and then press <Enter>. The below message
will be shown up and wait for the confirmation.