ADLINK aTCA-9710 - Manual (Page 59)

59
Flow Control
Set this option to select Flow Control for console redirection.
The settings for this value are None, Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Enable VT-UTF8 Combination Key support for ANSI/VT100 terminals.
The settings for this value are Enabled, Disabled.
Recorder Mode
Enabled this mode, only text will be sent. This is to capture terminal data.
Set this value to Enable/Disable.
Resolution 100x31
Set this option to extended terminal resolution. Set this value to Enable/Disable.
Legacy OS Redirection
On Legacy OS, the number of rows and columns supported redirection.
Set this value to 80x24 / 80x25.
Putty KeyPad
Select function key and keypad on putty.
Set this value to VT100 / LINUX / XTERMR6 / SCO / ESCN / VT400.
Redirection After BIOS POST
The settings specify if BootLoader is selected than legacy console redirection is
disabled before booting to legacy O.S. Default value is Always Enable which means
legacy console redirection is enabled for legacy O.S.
Set this value to Always Enable / BootLoader.