ADLINK Express-HL2 - Manual (Page 42)

Page 42 Express-HL2
I/O Map (cont'd)
Hex Range Device
3BC-3BE Reserved for parallel port
3C0-3DF VGA registers
3E0-3EF Available
3F0-3F7 Floppy Disk Controller
3F8-3FF Serial port 1
4D0 Master PIC Edge/Level Trigger register
4D1 Slave PIC Edge/Level Trigger register
CF8-CFB PCI configuration address register (32 bit I/O only)
CF9 Reset Control register (8 bit I/O)
CFC-CFF PCI configuration data register
580 Smbus base address for SB.
1C00 GPIO Base Address for SB
1800 PM (ACPI) Base Address for SB
1860 Alias for ICH TCO base address.
0A00~0AFF Reserved for SIO functions base address (ex: PME /GPIO etc)
200-23Fh Reserved for ISA.
240-25Fh Reserved for ISA.
280-28Fh Reserved for ISA.
2A0-2DFh Reserved for ISA.
300-33Fh Reserved for ISA.
380-39Fh Reserved for ISA.