ADLINK Express-HL2 - Manual (Page 56)

Page 56 Express-HL2
Feature Options Description
LCD Panel Type VBIOS Default
640X480
800X600
1024X768
1280X1024
1400X1050
1600X1200
1366X768
1680X1050
1920X1200
1440X900
1600X900
1024X768 LVDS2
1280X800
1920X1080
2048X1536 Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item
.
Active LFP No LVDS
Edp Port-A Select the Active LFP Configuration .
Panel Color Depth 18 Bit
24 Bit Select the LFP Panel Color Depth
Panel Scaling Auto
Off
Force Scaling Select the LCD panel scaling option used by the Internal Graphics
Device
.
GT – Power Management Control Info only
GT Info Info only Display GT info of Intel Graphics .
RC6 (Render Standby) Enabled
Disabled Check to enable render standby support .
GT OverClocking Support Enabled
Disabled Enable/Disable GT OverClocking Support .
7.3.4 SATA
Feature Options Description
SATA Controller(s) Enabled
Disabled Enable/Disable SATA device .
SATA-to-PATA Controller Enabled
Disabled Enable/Disable SATA to PATA device
SATA Mode Selection IDE
AHCI
RAID Determines how SATA controller(s) operate .
SATA Test Mode Enabled
Disabled Enable/Disable Test Mode .
Aggressive LPM Support Enabled
Disabled Enable PCH to aggressively enter link power state .
SATA Controller Speed Default
Gen1
Gen2 Indicates the maximum speed the SATA controller can support .