ADLINK Express-HL2 - Manual (Page 66)

Page 66 Express-HL2
Feature Options Description
Data Bits 7
8 Select Data Bits .
Parity None
Even
Odd
Mark
Space Select Parity .
Stop Bits 1
2 Select number of stop bits .
Flow Control None
Hardware RTS/CTS Select flow control .
VT-UTF8 Combo Key Support Disabled
Enable Enable VT-UTF8 Combination Key Support for ANSI/VT100
terminals
.
Recorder Mode Disabled
Enable With this mode enabled only text will be sent . This is to capture
Terminal data .
Resolution 100x31 Disabled
Enable Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25 On Legacy OS, the Number of Rows and Columns supported
redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400 Select FunctionKey and KeyPad on Putty .
Redirection After BIOS Post Always Enabled
BootLoader The Settings specify if BootLoader is selected than Legacy
console redirection is disabled before booting to Legacy OS
.
Default value is Always Enable which means Legaacy console
Redirection is enabled for Legacy OS
.
7.3.12 Clock
Feature Options Description
Clock Info only
Use Watchdog Timer for ICC
Enabled
Disabled Enable Watchdog Timer operation for ICC . If enabled, Watchdog
Timer will be started after ICC-related changes . This timer detects
platform instability caused by wrong clock settings .
Turn off unused PCI/PCIe clocks Disabled
Enable Disabled: all clocks turned on .
Enabled: clocks for empty PCI/PCIe slots will be turned off to save
power
. Platform must be powered off for changes to take effect .
ICC Locks After EOP Default
All Locked
All UnLocked Lock ICC register after EOP .
Clock Manipulation Info only
ICC Overclocking Lib Info only
CLKRUN# Logic Enabled
Disabled Enable the CLKRUN# logic to stop the PCI clock .