ADLINK Express-HL2 - Manual (Page 54)

Page 54 Express-HL2
Feature Options Description
Enabled
CPU C3 Report Disabled
Enabled Enable/Disable CPU C3 report to OS .
CPU C6 Report Disabled
Enabled Enable/Disable CPU C6 report to OS .
CPU C7 Report Disabled
CPU C7
CPU C7S Enable/Disable CPU C7 report to OS .
ACPI T State Disabled
Enabled Enable/Disable ACPI T state support .
CPU DTS Disabled
Enabled Enable/Disable CPU DTS .
7.3.2 Memory
Feature Options Description
Memory RC Version Info only Display Memory Reference Code Version .
Memory Frequency Info only Display Memory Frequency .
Total Memory Info only Display Total Memory .
Memory Voltage Info only Display Memory Voltage .
DIMM#0/1 Info only Display DIMM#0/1 .
CAS Latency (tCL) Info only Display CAS Latency (tCL) .
Minimum delay time Info only Display Minimum delay time .
CAS to RAS (tRCDmin) Info only Display CAS to RAS (tRCDmin) .
Row Precharge (tRPmin) Info only Display Row Precharge (tRPmin) .
Active to Precharge (tRASmin) Info only Display Active to Precharge (tRASmin) .
XMP Profile 1 Info only Display XMP Profile 1 support or not .
XMP Profile 2 Info only Display XMP Profile 2 support or not .
SPD Write Protect Enabled
Disabled Enable:Writes to SMBus slave addresses A0h - AEh are disabled .
Memory Frequency Limiter Auto Maximum Memory Frequency Selections in Mhz .
Max TOLUD Dynamic Maximum Value of TOLUD . Dynamic assignment would adjust
TOLUD automatically based on largest MMIO length of installed
graphic controller
.
MRC Fast Boot Enabled
Disabled Enable/Disable MRC fast boot .
Memory Remap Enabled
Disabled Enable/Disable e memory remap above 4G .
Channel A DIMM Control Enabled
Disabled Enable/Disable DIMMs on channel A .
Channel B DIMM Control Enabled
Disabled Enable/Disable DIMMs on channel B .
Memory Thermal Management Enabled
Disabled Enable/Disable Memory Thermal Management .