ADLINK Express-HL2 - Manual (Page 51)

Express-HL2 Page 51
7.2.4.6 System Management > Power Up
Feature Options Description
Power Up Info only
Power Up watchdog
Attention: F12 disables the Power Up
Watchdog
.
Enabled
Disabled The Power-Up Watchdog resets the system after a certain
amount of time after power-up
.
ECO Mode Disabled
Enable Reduces the power consumption of the system .
Power-up Mode
Attention: The Power-Up Mode only has effect,
if the module is in ATX-Mode
.
Turn on
Remain off
Last State Turn On: The machine starts automatically when the power
supply is turned on
.
Remain Off :To start the machine the power button has to be
pressed
.
Last State: when powered on during a power failure the system
will automatically power on when power is restored
7.2.4.7 System Management > LVDS Backlight
Feature Options Description
LVDS Backlight Info only
LVDS Backlight Bright 255 The value range starts by 0 and ends by 255 .
7.2.4.8 System Management > Smart Fan
Feature Options Description
Smart Fan Info only
CPU Smart FanTemperature Source CPU Sensor
System Sensor Select CPU smart fan source .
CPU Fan Mode AUTO (Smart Fan)
Fan Off
Fan On Select CPU Fan Mode .
CPU Trigger Point 1 Read only
Trigger Temperature 15 Specifies the temperature threshold at which the BMC turns on
CPU fan with specific PWM level
.
PWM Level 30 Select PWM level .
CPU Trigger Point 2 Read only
Trigger Temperature 60 Specifies the temperature threshold at which the BMC turns on
CPU fan with specific PWM level
.
PWM Level 40 Select PWM level .
CPU Trigger Point 3 Read only
Trigger Temperature 70 Specifies the temperature threshold at which the BMC turns on
CPU fan with specific PWM level
.
PWM Level 63 Select PWM level .
CPU Trigger Point 4 Read only
Trigger Temperature 80 Specifies the temperature threshold at which the BMC turns on
CPU fan with specific PWM level
.
PWM Level 100 Select PWM level .