ADLINK Express-HL2 - Manual (Page 63)

Express-HL2 Page 63
Feature Options Description
SECE Disabled
Enable Enable/Disable Root PCI Express System Error on
Correctable Error
.
PME SCI Disabled
Enable Enable/Disable PCI Express PME SCI .
Hot Plug Disabled
Enable Enable/Disable PCI Express Hot Plug .
PCIe Speed Auto
Gen1
Gen2 Select PCI Express port speed .
Detect Non-Compiance Disabled
Enable Detect Non-Compliance PCI Express Device . If enabled, it
will take more time at POST time .
Extra Bus Reserved 0 Extra Bus Reserved (0-7) for bridges behind this Root
Bridge
.
Reseved Memory 10 Reserved Memory Range for this Root Bridge .
Prefetchable Memory 10 Prefetchable Memory Range for this Root Bridge .
Reserved I/O 4 Reserved I/O (4K/8K/12K/16K/ ... /48K) Range for this Root
Bridge .
PCIE LTR Disabled
Enable PCIE Latency Reporting Enable/Disable .
PCIE LTR Lock Disabled
Enable PCIE LTR Configuration Lock .
Snoop Latency Ocerrid Disabled
Manual
Auto Snoop Latency Ocerride for PCH PCIE .
Non Snoop Latency Ocerrid Disabled
Manual
Auto Non Snoop Latency Ocerride for PCH PCIE .
7.3.8 Super IO
Feature Options Description
Super IO Chip Info only
W83627DHG Super IO Configuration Info only
Serial Port 1 Configuration
Serial
Port
Device
Settings
Change
Settings
Enabled
Disabled
IO=3F8h; IRQ=4
Auto
IO=3F8h; IRQ=4
IO=3F8h; IRQ=3,4,5,6,7,10,11,12
IO=2F8h; IRQ=3,4,5,6,7,10,11,12
IO=3E8h; IRQ=3,4,5,6,7,10,11,12
IO=2E8h; IRQ=3,4,5,6,7,10,11,12
Enable/Disable Serial Port (COM)
.
Fixed configuration of serial port
.
Select an optimal setting for Super IO device
.
Serial Port 2 Configuration
Serial
Port
Device
Settings
Enabled
Disabled
IO=2F8h; IRQ=4
Enable/Disable Serial Port (COM)
.
Fixed configuration of serial port
.