ADLINK Express-HL2 - Manual (Page 57)

Express-HL2 Page 57
Feature Options Description
Gen3
Intel ® Rapid Start Technology Submenu
SATA Port Configuration Submenu
Software Feature Mask Configuration Info only
RAID0 Enabled
Disabled Enable/Disable RAID0 feature .
RAID1 Enabled
Disabled Enable/Disable RAID1 feature .
RAID10 Enabled
Disabled Enable/Disable RAID10 feature .
RAID5 Enabled
Disabled Enable/Disable RAID5 feature .
Intel Rapid Recovery Technology Enabled
Disabled Enable/Disable Intel Rapid Recovery Technology .
OROM UI and BANNER Enabled
Disabled If enabled, then the OROM UI is shown . Otherwise, no OROM
banner or information will be displayed if all disks and RAID volumes
are Normal
.
HDD Unlock Enabled
Disabled If enabled, indicates that the HDD password unlock in the OS is
enabled
.
LED Locate Enabled
Disabled If enabled, indicates that the LED/SGPIO hardware is attached and
ping to locate feature is enabled on the OS
.
IRRT Only on ESATA Enabled
Disabled If enabled, then only IRRT volumes can span internal and eSATA
drives
. If disabled, then any RAID volume can span internal and
eSATA drives .
Smart Response Technology Enabled
Disabled Enable/Disable Smart Response Technology .
OROM UI Delay Enabled
Disabled If enabled, indicates the delay of the OROM UI Splash Screen in a
normal status
.
7.3.4.1 SATA > Intel® Rapid Start Technology
Feature Options Description
Intel (R) Rapid Start Disabled
Enabled Enable/Disable Intel (R) Rapid Start .
Entry on S3 RTC Wake Disabled
Enabled RapidStart invocation upon S3 RTC wake .
Entry After 10
Enable RTC wake timer at S3 entry . Value range from
0(Immediately) to 120 minutes .
Active Page Threshold Disabled
Enabled Support RST with small partition .
Hybrid Hard Disk Support
Disabled
Enabled Hybrid Hard Disk Support .
RapidStart Display Save/Restore Disabled
Enabled RapidStart Display Save/Restore .