ADLINK ETX-BT - Manual (Page 53)

Page 53
9.2.6.6 System Management > Power Up
Feature Options Description
Power Up Info only
Power Up watchdog
Attention: F12 disables the Power Up
Watchdog.
Enabled
Disabled
The Power-Up Watchdog resets the system after a certain
amount of time after power-up.
ECO Mode Disabled
Enable Reduces the power consumption of the system.
Power-up Mode
Attention: The Power-Up Mode only has
effect, if the module is in ATX-Mode.
Turn on
Remain off
Last State Turn On: The machine starts automatically when the
power supply is turned on.
Remain Off:To start the machine the power button has to
be pressed.
Last State: When powered on during a power failure the
system will automatically power on when power is restored
9.2.6.7 System Management > Smart Fan
Feature Options Description
Smart Fan Info only
CPU Smart FanTemperature
Source
CPU Sensor
System Sensor
Select CPU smart fan source.
CPU Fan Mode AUTO (Smart Fan)
Fan Off
Fan On
Select CPU Fan Mode.
CPU Trigger Point 1 Read only
Trigger Temperature 15 Specifies the temperature threshold at which the BMC
turns on CPU fan with specific PWM level.
PWM Level 30 Select PWM level.
CPU Trigger Point 2 Read only
Trigger Temperature 60 Specifies the temperature threshold at which the BMC
turns on CPU fan with specific PWM level.
PWM Level 40 Select PWM level.
CPU Trigger Point 3 Read only
Trigger Temperature 70 Specifies the temperature threshold at which the BMC
turns on CPU fan with specific PWM level.
PWM Level 63 Select PWM level.
CPU Trigger Point 4 Read only
Trigger Temperature 80 Specifies the temperature threshold at which the BMC
turns on CPU fan with specific PWM level.
PWM Level 100 Select PWM level.