ADLINK ETX-BT - Manual (Page 62)

Page 62
9.3.11.1 Serial Port Console > Console Redirection Settings
Feature Options Description
COM0/COM1
Console Redirection Settings Info only
Terminal Type VT100
VT100+
VT-UTF8
ANSI Emulation: ANSI: Extended ASCII char set. VT100: ASCII
char set. VT100+: Extends VT100 to support color,
function keys, etc. VT-UTF8: Uses UTF8 encoding to map
Unicode chars onto 1 or more bytes.
Bits per second 9600
19200
38400
57600
115200 Selects serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may
require lower speeds.
Data Bits 7
8 Select data bits.
Parity None
Even
Odd
Mark
Space Select parity.
Stop Bits 1
2 Select number of stop bits.
Flow Control None
Hardware RTS/CTS Select flow control.
VT-UTF8 Combo Key Support Disabled
Enable Enable VT-UTF8 combination key support for ANSI/VT100
terminals.
Recorder Mode Disabled
Enable On this mode enabled only text will be sent. This is to
capture Terminal data.
Resolution 100x31 Disabled
Enable Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25 On Legacy OS, the number of rows and columns
supported redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400 Select function key and keypad on Putty.
Redirection After BIOS Post Always Enabled
BootLoader The settings specify if BootLoader is selected than legacy
console redirection is disabled before booting to legacy
OS. Default value is Always Enable which means legacy
console redirection is enabled for legacy OS.