ADLINK ETX-BT - Manual (Page 57)

Page 57
Feature Options Description
IGFX Boot Display Device CRT Select the video device which will be activated during
POST.This has no effect if external graphic present.
EDP to LVDS Bridge Configuration Info only
Data format and Color Depth VESA 24 bpp
JEIDA 24 bpp
JEIDA/vesa 18 bpp Data format and color depth select
LVDS Output Mode Dual LVDS bus
Single LVDS bus Single/Dual mode select
DE Polarity Active High
Active Low DE polarity select
Vsync Polarity Active High
Active Low Vsync polarity select
Hsync Polarity Active High
Active Low Hsync polarity select
GT – Power Management Control Info only
RC6 (Render Standby) Enabled
Disabled Check to enable render standby support.
9.3.4 SATA
Feature Options Description
SATA Info only
SATA Controller(s) Enabled
Disabled Enable / Disable Serial ATA.
SATA Mode Selection IDE Mode
AHCI Mode Select IDE / AHCI
SATA Test Mode Enabled
Disabled Test Mode enable / disable.
SATA Controller Speed Gen1
Gen2 SATA speed support Gen1 or Gen2
SATA Port Configuration Submenu
9.3.4.1 SATA > SATA Port Configuration
Feature Options Description
SATA Port Configuration Info only
Port X Disabled
Enabled Enable/Disable SATA Port X.
HotPlug Enabled
Disabled Enabl / Disable SATA PORT X hotplug.