ADLINK ETX-BT - Manual (Page 8)

Page 8
2 Specifications
2.1 General
X CPU: Single, dual or quad-core Intel® Atom™ or Celeron® processor
• Atom™ E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)
• Atom™ E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)
• Atom™ E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)
• Atom™ E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)
• Atom™ E3805 1.33 GHz 533 (No Turbo, No Graphics) 4W (2C/1066)
• Atom™ E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)
• Celeron ® N2930 1.83 GHz, 688/854 (Turbo) 7.5W (4C/1333)
• Celeron ® J1900 2 GHz, 688/854 (Turbo) 10W (4C/1333)
Supporting: Single, dual or quad Out-of-Order Execution (OOE) processor cores,
Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture, IA 32-bit ,
PCLMULQDQ Instruction DRNG, Intel® Thermal Monitor (TM1 & TM2)
Note: Availability of features may vary between processor SKUs.
X
Memory: Single SODIMM socket for up to 4 GB non-ECC 1333/1066 MHz DDR3L memory
X Embedded BIOS: AMI EFI with CMOS backup in 8MB SPI BIOS
X Expansion Busses
o
PCI 32-bit rev 2.3 at 33 MHz supporting 4 bus masters
o
ISA 16-bit (through LPC-ISA bridge), no DMA support
o
SMBus (system) , I 2 C (user)
X SEMA Board Controller: supporting voltage/current monitoring, power sequence, debug
support, AT/ATX mode control, logistics and forensic information, flat panel control, general
purpose I
2 C, watchdog timer
X Debug Headers: 40-pin multipurpose flat cable connector for use in combination with DB-40
debug module providing BIOS POST code LEDs, BMC access, SPI BIOS flashing,
power test points, debug LEDs