2 memory, 3 graphics, Memory – ADLINK ETX-BT User Manual
Page 56: Graphics
Page 56
Feature
Options
Description
Enabled
CPU DTS
Disabled
Enabled
Enabled/Disable Digital Thermal Sensor.
9.3.2
Memory
Feature
Options
Description
Memory Info
only
Total Memory
Info only
Display Total Memory.
DIMM#0
Info only
Display DIMM#0/1.
SPD Write Protect
Enabled
Disabled
Enabled:Writes to SMBus slave addresses A0h – Aeh are
disabled.
Max TOLUD
2.5 GB
Maximum Value of TOLUD.
9.3.3
Graphics
Feature
Options
Description
Graphics Info
only
IGFX VBIOS Version
Info only
Primary Display Interface
Auto
IGD
PCIE
Select which of IGD/PCI graphics device should be primary
display.
Integrated Graphics Device
Enabled
Disabled
Enable : Enable integrated graphics device (IGD) when
selected as the primary video adaptor. Disable: Always
disable IGD.
Aperture Size
256MB
Select the aperture size.
DVMT Pre-Allocated
64M
Select DVMT 5.0 pre-allocated (fixed) graphics memory size
used by the internal graphics device.
DVMT Total Gfx Mem
256MB
Select DVMT5.0 total graphic memory size used by the
internal graphics device.
LVDS Backlight Control Source
BMC
IGFX
Select LVDS backlight control function.
LCD Panel Type
AUTO
Select LVDS backlight control function.
AMI Graphics Output Protocol Policy
[UEFI GOP only]
Submenu
User select monitor output by graphics output protocol
LVDS Backlight Brightness
255
A change takes effect immediately.The value range starts by 0
and
Ends by 255.