ADLINK ETX-BT - Manual (Page 7)

Page 7
1 Introduction
1.1 Description
The ETX-BT is based on the latest Intel® Atom™ processor E3800 SoC series, adopting the
latest 22nm process technology with 3-D Tri-Gate transistors featuring significant improvements in
computational performance and energy efficiency. The E3800 SOC series integrates processor-
and GPU cores and all I/O on a single chip. Processor performance is scalable from a single-core
Intel® Atom™ processor E3815 at 1.4GHz to a quad-core Intel® Atom™ processor E3845 at
1.9GHz. Two quad-core Intel® Celeron® processors, based on the same microarchitecture, are
also available.
The module supports a single SODIMM for up to 4GB of DDR3L system memory and comes with
integrated support for high resolution VGA and single/dual channel LVDS. Optionally, a third
display can be connected through an onboard flat cable connector. The ETX-BT's graphics core
supporting two independent displays easily outperforms earlier ETX module generations. Being a
drop in replacement for older ETX modules, the ETX-BT fully supports all typical legacy interfaces
of the ETX form factor such as: full dual PATA IDE with Master/Slave, ISA-bus, PCI-bus,
serial/parallel ports and Intel based 10/100Mbps LAN. As a way to migrate away from legacy
PATA flash devices, the module offers an optional soldered SATA-based SSD with a capacity of 2
to 64 GB.
ETX-BT is a RoHS compliant and leadfree product.