ADLINK CoreModule 920 - Manual (Page 13)

Chapter 2 Product Overview
CoreModule 920 Reference Manual 7
Module Features
• CPU
 Provides a 1.7GHz (17W) Intel Core i7 3517UE Processor Core and Graphics Memory Controller
Hub
 Provides a DMI (Direct Media Interface) with 2 GB/s of bandwidth in each direction
 Provides an FDI (Flexible Display Interface) for carrying display traffic to the PCH
 Provides Enhanced Intel SpeedStep® Technology (EIST)
 Supports Hyper-Threading Technology
 Provides up to 8MB on-die L3 cache
 Provides 3D graphics engine
 Provides dual-channel DDR3 memory controller (only one channel connected on board)
• Memory
 Provides 2GB of +1.5V DDR3 soldered, on-board memory
 Provides double data rate interface
 Supports 32-bit data bus
 Supports DDR3 1333MHz memory
• Expansion Buses
 PCI bus version 2.3 at 33MHz
 PCIe bus version 2.0 at 100MHz
• SATA Interface
 Supports two SATA 3.0 ports from the BD82QM67 PCH
 Supports up to 6Gb/second data transfer rate
 Supports independent DMA operation
 Supports Native Command Queuing
 Provides Auto Activate for DMA
 Supports Hot Plug features
 Provides two standard SATA 3.0 connectors
 Supports one SATA 2.0 port dedicated for the SSD (Solid State Drive)
• Serial Interface
 Provides two buffered serial ports (COM1-2) with full handshaking
 Provides two 10-pin headers
 Provides 16550-equivalent controllers with 16-byte FIFO modes
 Supports full-duplex buffering and full status reporting
 Supports full modem capability
 Supports programmable word length, stop bits, and parity
 Provides programmable baud-rate generator