Security bios setup screen, Figure 4-5 – ADLINK CoreModule 920 User Manual

Page 56

Advertising
background image

Chapter 4

BIOS Setup

50

Reference Manual

CoreModule 920

CSM parameters

Launch CSM [Always; Never]

Boot option filter [UEFI and Legacy; Legacy only; UEFI only]

Launch PXE OpROM policy [Do not launch; UEFI only; Legacy only]

Launch Storage OpROM policy [Do not launch; UEFI only; Legacy only]

Launch Video OpROM policy [Do not launch; UEFI only; Legacy only]

Other PCI device ROM priority [UEFI only; Legacy OpROM]

Security BIOS Setup Screen

Figure 4-5. Security BIOS Setup Screen

Password Description

Administrator Password [Create New Password]

User Password [Create New Password]

HDD Security Configuration:

Aptio Setup Utility - Copyright (C) 20XX American Megatrends, Inc.

Password Description

If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following rang:
Minimum length 3
Maximum length 20

Version X.XX.XXXX. Copyright (C) 20XX American Megatrends, Inc.

CM920_BIOS_Security_a

Main Advanced Chipset Boot Security Save & Exit

Administrator Password

User Password

[Setting Description]

: Select Screen

: Select Item

+/- : Change Opt.

F1 : General Help

Enter : Select

F2 : Previous Values
F3 : Optimized Defaults

F4 : Save & Exit

ESC: Exit

HDD Security Configuration:

HDD0: GLS85LS1008P

Advertising