ADLINK CoreModule 920 - Manual (Page 7)

CoreModule 920 Reference Manual 1
Chapter 1 About This Manual
Purpose of this Manual
This manual is for designers of systems based on the CoreModule ® 920 Single Board Computer (SBC). This
manual contains information that permits designers to create an embedded system based on specific design
requirements.
Information provided in this reference manual includes:
• Product Overview
• Hardware Specifications
• BIOS Setup information
• Technical Support Contact Information
Information not provided in this reference manual includes:
• Detailed chip specifications (refer to the References section of this chapter)
• Internal component operation
• Internal registers or signal operations
• Bus or signal timing for industry-standard busses and signals
• Pin-signal definitions for industry-standard interfaces
References
The following list of references may help you successfully complete your custom design.
Industry Standard Specifications
• PCI/104-Express Specification, Revision 2.0, February, 2011
Web site: http://www.pc104.org/pci104_Express_specs.php
• PCI-104 Specification
Web site: http://www.pc104.org/pci_104_specs.php
• PCI Express Specification, Revision 2.0, January, 2007
Specification (for members): http://www.pcisig.com/specifications/pciexpress/base2/#b21
• PCI Specification, Revision 2.3, March 29, 2002
Web site: http://www.pcisig.com
• LPC Specification Version 1.1
Web site: http://www.intel.com/design/chipsets/industry/lpc.htm
• USB Specification Version 2.0
Web site: http://www.usb.org/developers
• SATA Specification Version 3.0
Web site: http://www.sata-io.org/
• Ethernet IEEE802.3 Specifications
Web site: http://standards.ieee.org/about/get/802/802.3.html