ADLINK CoreModule 920 - Manual (Page 23)

Chapter 2 Product Overview
CoreModule 920 Reference Manual 17
Figure 2-7. Jumper Header Locations (Top Side)
Specifications
Physical Specifications
Table 2-4 provides the physical dimensions of the CoreModule 920.
Table 2-4. Weight and Footprint Dimensions
Item Dimension
NOTE Overall height is measured from the
upper board surface to the top of the
highest permanent object (PCI-104
connector) on the upper board surface.
This does not include the cooling
solution, which is required on all
versions of the board and may increase
the height of the board. Component
height should not exceed 0.345"
(8.763mm) from the upper surface of the
board and 0.190" (4.826mm) from the
lower surface of the board. See
Figure 2-10 on page 20 for the stack
heights of the cooling solutions on the
board.
Weight 0.12 kg (0.25 lbs)
Height (overall) 9.525mm (0.375 inches)
Board thickness 2.362mm (0.093 inches)
Width 96.01 mm (3.78 inches)
Length 102.87 mm (4.05 inches)
CM920_T
op_jmpr_a
Key:
JP1 - LVDS Voltage
JP2 - PCI-104 Voltage
JP2 JP1