ADLINK CoreModule 720 - Manual (Page 20)

Chapter 2 Product Overview
14 Reference Manual CoreModule 720
Figure 2-7. Jumper Header Locations (Top Side)
Specifications
Physical Specifications
Table 2-4 provides the physical dimensions of the CoreModule 720.
Table 2-4. Weight and Footprint Dimensions
Item Dimension
NOTE Height is measured from the upper
board surface to the highest permanent
component (PC/104 connector) on the
upper board surface. This does not
include the cooling solution, which is
required on all versions of the board and
may increase the height of the board.
On-board component height should not
exceed 0.345" (8.763mm) from the
upper surface of the board and 0.190"
(4.826mm) from the lower surface of the
board. See
Figure 2-10 on page 18 for
the stack heights of the cooling solutions
on the board.
Weight 0.12 kg (0.25 lbs)
Height (overall) 11.05 mm (0.435 inches)
Board thickness 2.362 mm (0.093 inches)
Width 96.01 mm (3.78 inches)
Length 115.57 mm (4.55 inches)
CM720_T
op_Jmpr_a
Key:
JP1 - Clear CMOS
JP3 - LVDS Voltage Select
JP3
JP1