ADLINK CoreModule 720 - Manual (Page 49)

Chapter 4 BIOS Setup
CoreModule 720 Reference Manual 43
• Console Redirection Settings
- Terminal Type [VT100; VT100+; VT-UTF8; ANSI]
- Bits per second [9600; 19200; 38400; 57600; 115200]
- Data Bits [7; 8]
- Parity [None; Even; Odd; Mark; Space]
- Stop Bits [1; 2]
- Flow Control [None; Hardware RTS/CTS]
- Recorder Mode [Disabled; Enabled]
- Resolution 100x31 [Disabled; Enabled]
- Legacy OS Redirection [80x24; 80x25]
- PuTTY Keypad [VT100; LINUX; XTERMR6; SCO; ESCN; VT400]
- Redirection After BIO [Always Enable; BootLoader]
Chipset BIOS Setup Screen
Figure 4-3. Chipset BIOS Setup Screen
NOTE The serial port console is not hardware protected. Diagnostic software that
probes hardware addresses may cause a loss or failure of the serial console
functions.
Aptio Setup Utility - Copyright (C) 20XX American Megatrends, Inc.
Version X.XX.XXXX. Copyright (C) 20XX American Megatrends, Inc.
CM720_BIOS_Chipset_b
Main Advanced Chipset Boot Security Save & Exit
North Bridge Chipset Configuration
South Bridge Chipset Configuration
IOH Configuration
[Setting Description]
: Select Screen
: Select Item
+/- : Change Opt.
F1 : General Help
Enter : Select
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC: Exit