ADLINK CoreModule 435 - Manual (Page 11)

Chapter 2 Product Overview
CoreModule 435 Reference Manual 5
• Serial Ports
♦ Provides four 10-pin headers and four buffered RS-232 serial ports with full handshaking and
modem capability
♦ Provides 16C550 or 16C552 UARTs, each with a built-in 16-byte FIFO buffer
♦ Supports RS-232 or RS-485 operation on ports 1 and 2
♦ Supports programmable word length, stop bits, and parity
♦ Supports 16-bit programmable baud-rate generator and an interrupt generator
• Ethernet
♦ Provides two fully independent Ethernet ports
♦ Supports IEEE 802.3 10BaseT/100BaseTx and 10BaseT/100BaseTx/1000BaseT compatible
physical layers
♦ Provides Ethernet LED header for Gigabit Ethernet
♦ Provides one Intel 82541PI Gigabit Ethernet controller and one Fast Ethernet controller internal to
the CPU
♦ Supports Auto-negotiation for speed, duplex mode, and flow control
♦ Supports full-duplex or half-duplex mode
• Full-duplex mode supports transmit and receive frames simultaneously
• Supports IEEE 802.3x Flow control in full duplex mode
• Half-duplex mode supports enhanced proprietary collision reduction mode
• Utility Interface
♦ Provides PS/2 Keyboard and PS/2 Mouse Interfaces
♦ Supports external battery for Real Time Clock operation
♦ Supports standard external 8 Ω speaker interface
♦ Supports external reset switch
• USB Ports
♦ Provides one root USB hub
♦ Provides two USB ports
♦ Supports USB v2.0 and USB v1.1
• Video (LCD/CRT) Display
Enhanced 2D graphics accelerator
♦ Supports BitBLT implementation for all 256 raster operations
♦ Provides hardware command queue
♦ Provides Direct Draw accelerator
♦ Provides GDI 2000 accelerator
♦ Supports transparent BitBLT with source and destination keys
♦ Supports rectangle clipping
♦ Supports fast line draw engine with styled pattern
♦ Supports fast rectangle fill engine
♦ Supports 64x64x2 bit-mapped mono hardware cursor
♦ Supports 256MB frame buffer with linear addressing